Product Design for Utilizing Waste Husk in Ciwulan Village into Rice Husk Brickets Using the Taguchi Method
DOI:
https://doi.org/10.52435/jaiit.v6i2.608Keywords:
Rice Husk Brickets, Taguchi Method, Waste HuskAbstract
The village of Ciwulan faces environmental challenges due to the abundance of rice husk waste. This study investigates the Taguchi method for converting rice husk waste into briquettes to improve production quality and efficiency. By evaluating the impact of rice husk charcoal, adhesive, and drying time, the study identifies the optimal combination to enhance combustion efficiency. The experimental results indicate that drying time significantly influences briquette quality, with the optimal combination being 100 grams of rice husk charcoal, 100 grams of adhesive, and 48 hours of drying. This combination resulted in the lowest average burning time of 9.5 minutes compared to other combinations. Using the Taguchi method effectively reduced burning time provided a practical solution for managing rice husk waste, and improved the quality of eco-friendly renewable energy products. This study offers a novel approach to agricultural waste processing with potential economic benefits for rural communities.
References
Siswati TIND. Pemanfaatan Limbah Pertanian Sebagai Energi Alternatif Melalui Konversi Thermal. Buana Sains. 2012;12(1):117–22.
Sutisna NA, Rahmiati F, Amin G. Optimalisasi Pemanfaatan Sekam Padi Menjadi Briket Arang Sekam untuk Menambah Pendapatan Petani di Desa Sukamaju, Jawa Barat. Agro Bali Agric J. 2021;4(1):116–26.
Taguchi G. System of Experimental Design; Engineering Methods to Optimize Quality and Minimize Costs. New York: UNIPUB/Kaus International; 2020.
Ghofur A, Mursadin A, Siswanto R. Pemanfaatan Briket Limbah Sekam Padi Sebagai Energi Alternatif Di Desa Kayu Bawang Melalui Teknologi Briket. J Pengabdi ILUNG (Inovasi Lahan Basah Unggul). 2024;3(3):527–32.
Muhammad Ikhsan Sukaria, Rini Perdana IAR. Pembuatan Briket Dari Limbah Sekam Padi Di Desa Gona Kecamatan Kajuara. ABDIKIMIA. 2024;1(2):39–43.
Firdaus AB, Amalia R, Putri MS, Utomo E, Munahefi DN. Pemberdayaan Kelompok Penyandang Disabilitas Melalui Pelatihan Limbahh Pertanian Sekam Padi Menjadi Briket Bioarang. J Bina Desa. 2022;4(3):326–32.
Dahdah SS. Pemanfaatan Sekam Padi Menjadi Briket Sebagai Energi Alternatif Studi Kasus Desa Wotansari – Balong Panggang. DedikasiMU(Journal Community Serv. 2020;2(1):182–90.
Raharjo T. Pengurangan Emisi Gas Rumah Kaca melalui Pemanfaatan Limbah Pertanian. J Lingkung. 2021;12(3):99–110.
Hermanto P. Optimasi Proses Produksi Briket dengan Metode Statistik. J Tek Mesin. 2022;19(3):211–25.
Manisi L, Kadir, Kadir A. Pengaruh Variasi Komposisi Terhadap Karakteristik Briket Campuran Sekam Padi Dan Kulit Jambu Mete. ETHALPY J Ilm Mhs Tek Mesin [Internet]. 2019;4(2):60–7. Available from: http://ojs.uho.ac.id/index.php/ENTHALPY
Fachruzzaki, Halim RL. Pengaruh Campuran Sekam Padi Pada Briket Batubara. J GEOSAPTA. 2022;8(1):15–8.
Gobel AP, Arief AT. Pengaruh Karbonisasi Terhadap Karakteristik Tempurung Kelapa Berdasarkan Uji Proksimat Dan Nilai Kalor. J Miner Energi, dan Lingkung. 2022;5(1):48–54.
Chambers JM, Wyborn C, Ryan ME, Reid RS, Riechers M, Serban A, et al. Six Modes of Co-Production for Sustainability. Nat Sustain. 2021;4(11):983–96.
Ma Y, Yuan S, Ma Z, Hou Y, Niu S, Lekai L, et al. Comparative Study of Different Pretreatment and Combustion Methods on the Grindability of Rice-Husk-Based SiO2. Nanomaterials. 2023;13(22):2–16.
Rashid DKMJ. Optimize the Taguchi method, the signal-to-noise ratio, and the sensitivity. Int J Stat Appl Math. 2023;8(6):64–70.
Cesprini E, Greco R, Causin V, Urso T, Cavalli R, Zanetti M. Quality assessment of pellets and briquettes made from glued wood waste. Eur J Wood Wood Prod [Internet]. 2021;79(5):1153–62. Available from: https://doi.org/10.1007/s00107-021-01695-1
Jung KH, Lee JH. Determination of an Optimal Parameter Combination for Single PEMFC Using the Taguchi Method and Orthogonal Array. Energies. 2024;17(7):2–11.
Chen HJ, Lin HC, Tang CW. Application of the taguchi method for optimizing the process parameters of producing controlled low-strength materials by using dimension stone sludge and lightweight aggregates. Sustain. 2021;13(10):2–27.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Arif Rahman Hakim, Dicky Suryapranatha, Amalia, Afif Hakim
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All our articles are published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.
